.
Oxidation Bath with Oxflo Controller – 16900-7
The Seta Oxidation Bath is used for quantative analysis of the tendency of oils and fuels to form sludge, acids and deposits when exposed to oxygen in the presence of metallic catalysts over extended periods.
Oxidation Bath with Oxflo Controller – 16900-7
Features
- Ambient +5 °C to 120 °C temperature range
- 6 position oil bath
- Reliable digital thermostir unit
- Seta Oxflo Controller and flowmeters included
- Low liquid protection
- Over temperature cut out
specifications
| TEMPERATURE RANGE | Ambient +5 °C to 150 °C |
|---|---|
| STABILITY | ±0.05 °C |
| BATH TYPE | Oil filled |
| BATH CAPACITY | 35 litres |
| POWER | 1.5 kW |
| VOLTAGE | 110/120 V, 50/60 Hz 220/240 V, 50/60 Hz |
| SIZE (HXWXD) | Bath: 64 x 36 x 33 cm Oxflo Control Unit: 46 x 35 x 26 cm |
| WEIGHT | Bath: 15 kg Oxflo Control Unit: 21 kg |
| CCCN CODE | Tariff 90318080 |
Manufacturers
show DATA — DO NOT CHANGE ID–
Document
Oxidation Bath with Oxflo Controller – 16900-7
Industries
show DATA — DO NOT CHANGE ID–
Methods
show DATA — DO NOT CHANGE ID–
Spares and accessories for 16900-7
Silicon Carbide Paper P100 FEPA Grade (Pack of 50) – 11470-0
For use with Stanhope-Seta Corrosion, TOST, Robot and Oxi-Cor baths.
Pre-Formed Copper and Steel Catalyst Coil (pack of 6) – 16921-0
Pre-formed coils are supplied with a Material Certificate stating conformance to the relevant specification.
Steel Catalyst Wire (pack of 6) – 16920-0
6 x 3 metre lengths of standard catalyst wire, supplied with a Material Certificate stating conformance to the relevant specification.
Set Glassware ASTM D943, ASTM D4310, ISO 4263, IP 157 (6 cells) – 16911-0
Glassware to conform to ASTM D943 and D4310 test methods. Comprises 6 x glass condenser, test tubes, delivery tubes and interconnecting tubing.
Set Glassware ASTM D2274, D7462, ISO 12205, IP 388 (6 cells) – 16910-0
Comprises six each condensers, test tubes, delivery tubes and interconnecting tubing.
ASTM D943 & D4310 Accessory Pack – 16950-0
Supplied with;
1 x Thermometer bracket (not shown in image)
2 x Support rings
6 x Sampling tube holders
6 x Sampling tube spacers
6 x Stainless steel sampling tubes with Luer connector (one shown in image)
6 x Stoppers
6 x Oil level indicator strips (not shown in image)
6 x 10 ml syringes
1 x Thermometer bracket (not shown in image)
2 x Support rings
6 x Sampling tube holders
6 x Sampling tube spacers
6 x Stainless steel sampling tubes with Luer connector (one shown in image)
6 x Stoppers
6 x Oil level indicator strips (not shown in image)
6 x 10 ml syringes
Sample Filtering Kit for ASTM D2274 – 16914-0
Comprise:
– Filters
– Filter holder
– Vacuum flask
– Forceps
– Desiccator
– 0.8 micron 47 mm filters x 100
– Vacuum pump
– 250 ml beaker (graduated to 200 ml)
– Silicone tube
Analytical Balance – 99100-2
Rugged electronic balance with wide angle LCD display. The balance is equipped with filters to reduce vibration, and a glass enclosure with sliding doors on three sides for ease of access.
Laboratory Drying Oven – 99200-3
A digitally controlled oven suitable for heat storage, heat treatment and drying processes at temperatures up to 300 °C for timed periods up to 999 hours.
Thermometer for ASTM D943 & D4310 Oxidation Cell: Low Haz – 16980-2
A precision liquid in glass thermometer. Contains a unique and non-hazardous thermometric fluid that has been formulated to meet traditional precision, response, and dimensional requirements
Hot Plate – 25000-4
The Hot Plate is a compact, bench-top heat source designed for laboratory procedures that require precise temperature control.
Copper Catalyst Wire (Pack of 6) – 16930-0
3 metre lengths.
Standard wire lengths are supplied with a Material Certificate stating conformance to the relevant specification.
